Motorola CP200XLS 用户手册

Your dealer/programmer must preprogram a 
button to access this feature (see page 17).

If a channel or talkgroup continually generates 
unwanted calls or noise (a “nuisance” channel/
talkgroup), you can temporarily remove it from 
the scan list:

1

While the radio is on the nuisance channel/
talkgroup, press the preprogrammed 
Nuisance Channel Delete button until you 
hear a tone.

2

Release the Nuisance Channel Delete 
button. The nuisance channel/talkgroup is 
deleted.
Note:

You cannot temporarily delete the 
channel/talkgroup that has been 
preprogrammed by your dealer/
programmer as your designated scan 
channel/talkgroup, a priority channel/
talkgroup, or the last remaining 
channel/talkgroup in the scan list.

1

Power OFF the radio. Once the radio is 
powered on again, the deleted nuisance 
channels/talkgroups are restored to the scan 
list.

Press the preprogrammed Scan button to stop 
the scan.

2

Press the preprogrammed Scan button again 
to start scanning again. The deleted nuisance 
channels/talkgroups are restored to the scan 
list.

Select a channel/talkgroup that has not been 
preprogrammed for scan by your dealer/
programmer to stop Scan. Once you return to 
the original channel/talkgroup, the deleted 
nuisance channels/talkgroups are restored to 
the scan list.