Magma EB2 用户手册
M A G M A
25
The second portion, covering the power supply and other circuitry being
less frequently accessed is secured with seven (7) regular screws. To
remove that portion of the cover use a regular Phillips–head
screwdriver.
less frequently accessed is secured with seven (7) regular screws. To
remove that portion of the cover use a regular Phillips–head
screwdriver.
Install 3
rd
Party PCIe Cards
When installing 3
rd
Party PCIe cards into the Magma expansion chassis,
it makes no difference which PCIe slot you place your cards in. Usually
that is determined by accessibility and heat dissipation considerations
as may be specified by the card manufacturer.
that is determined by accessibility and heat dissipation considerations
as may be specified by the card manufacturer.
Install the PCIe peripheral cards following the card manufacturer’s
recommendations. Some PCIe card manufacturers recommend that you
install their software driver(s) prior to installing the hardware. If this is
the case, you should install their driver before you connect and power
up the expansion chassis.
recommendations. Some PCIe card manufacturers recommend that you
install their software driver(s) prior to installing the hardware. If this is
the case, you should install their driver before you connect and power
up the expansion chassis.
CAUTION
Please ensure that the current ratings specified on the power supply
label are not exceeded as a result of installing PCIe cards or hard
drives.
label are not exceeded as a result of installing PCIe cards or hard
drives.