Motorola PTP 600 Series 用户手册

 

 

212

Figure 134 shows the license key data entry screen. This screen can only be accessed by the 

system administrator. If you do not have access to the PTP 600 Series system administration 

pages then please contact your designated system administrator.  

It must be noted that configuring link encryption will necessitate a 600 Series bridge service 

outage. Therefore it is recommended that the configuration process be scheduled during an 

appropriate period of low link utilization. Motorola recommends the following process for 

entering new license keys and minimizing service outage. 

1.  Open two browsers, one for each end of the link 

2.  Navigate to the ‘License Key’ data entry page for each end of the link 

3.  Enter the license keys and click the ‘Validate license key’ button at each end of the link. 

This will allow the software to validate the license key prior to the system reset. (DO NOT 

CLICK ARE YOU SURE POPUP DIALOG) 

4.  When both license keys have been successfully validated confirm the reboot for both 

ends of the link. The software is designed to allow five seconds so that a user can 

command both ends of the link to reset before the wireless link drops. 

5.  The link will automatically re-establish.