Netgear WNDR3400-100NAS 用户手册
Troubleshooting
30
Troubleshooting
This chapter gives information about troubleshooting your wireless router. You can find help with
the following problems:
the following problems:
•
•
•
•
•
•
Basic Setup Checklist
The following items are the most common errors made when initially setting up a router. Carefully
review the checklist to make sure that you have followed the recommended procedures.
review the checklist to make sure that you have followed the recommended procedures.
Be sure to always start your network in this sequence:
1.
Turn off and unplug the modem from its power outlet, and turn off the wireless router and
computer.
computer.
2.
Turn on the modem, and wait 2 minutes.
3.
Turn on the wireless router, and wait 1 minute.
4.
Turn on the computer.
Make sure that the Ethernet cables are securely plugged in:
1.
Verify that the Internet status light on the wireless router is lit if the Ethernet cable to the
wireless router from the modem is plugged in securely and the modem and wireless router are
both turned on (see
wireless router from the modem is plugged in securely and the modem and wireless router are
both turned on (see
2.
Verify that for each powered-on computer connected to the wireless router with a securely
plugged in Ethernet cable, the corresponding wireless router LAN port status light is lit (see
plugged in Ethernet cable, the corresponding wireless router LAN port status light is lit (see
of each LAN port (see