Nortel Networks 2700 用户手册
Chapter 2 Cabling the VPN Router and turning the power on 41
Nortel VPN Router Installation — VPN Router 2700
LEDs on the system 10/100BASE-TX Ethernet port
shows the LEDs for the 10/100BASE-TX Ethernet port located on the
rear of the VPN Router 2700.
Figure 9
LEDs on the system LAN port
describes the LEDs on the system 10/100BASE-TX Ethernet port.
Table 5
LED indicators on the system 10/100BASE-TX Ethernet port
LED
Indicator
Description
Green
On
The LAN port is operating at 100 Mb/s.
Off
The LAN port is operating at 10 Mb/s.
Yellow
On
The cable connections between the LAN port and the
hub are good.
Off
The cable connections between the LAN port and the
hub are faulty.
Flashing
The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
CS260011A
Green
Yellow