Nortel Networks 2700 User Manual

Page of 108
Chapter 2  Cabling the VPN Router and turning the power on  41
Nortel VPN Router Installation — VPN Router 2700 
LEDs on the system 10/100BASE-TX  Ethernet port
 shows the LEDs for the 10/100BASE-TX Ethernet port located on the 
rear of the VPN Router 2700.
Figure 9   
LEDs on the system LAN port
 describes the LEDs on the system 10/100BASE-TX Ethernet port. 
Table 5   
LED indicators on the system 10/100BASE-TX Ethernet port
LED
Indicator
Description
Green 
On
The LAN port is operating at 100 Mb/s.
Off
The LAN port is operating at 10 Mb/s.
Yellow
On
The cable connections between the LAN port and the 
hub are good.
Off
The cable connections between the LAN port and the 
hub are faulty. 
Flashing
The LAN port is sending or receiving network data. 
The frequency of the flashes increases with 
increased traffic.
CS260011A
Green
Yellow