Rosewill RNWB-11001 用户手册

¾

 

Enable Wireless Router Radio - The wireless radio of this Router can be enabled 

or disabled to allow wireless stations access.   

¾

 

Enable SSID Broadcast - When wireless clients survey the local area for wireless 

networks to associate with, they will detect the SSID broadcast by the Router. If you 

select the Enable SSID Broadcast checkbox, the Wireless Router will broadcast its 

name (SSID) on the air. 

¾

 

Enable WDS - Check this box to enable WDS. With this function, the Router can 

bridge two or more Wlans. If this checkbox is selected, you will have to set the 

following parameters as shown in Figure 4-17. Make sure the following settings are 

correct 

 

Figure 4-17 

¾

 

SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a 

client. You can also use the search function to select the SSID to join. 

¾

 

BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as 

a client. You can also use the search function to select the BSSID to join. 

¾

 

Search - Click this button, you can search the AP which runs in the current channel. 

¾

 

Key type - This option should be chosen according to the AP's security 

configuration.It is recommended that the security type is the same as your AP's 

security type 

-55-