Rosewill RNX-N150RT 用户手册
Wireless Router
RNX-N150RT
User Manual
- 31 -
)
Note:
a. The WPS LED on the Router will light green for five minutes if the device has been
successfully added to the network.
b. The WPS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
4.5 Network
Figure 4-5 the Network menu
There are three submenus under the Network menu (shown in Figure 4-5): LAN, WAN and MAC
Clone. Click any of them, and you will be able to configure the corresponding function.
Clone. Click any of them, and you will be able to configure the corresponding function.
4.5.1
LAN
Choose menu “Network → LAN”, you can configure the IP parameters of the LAN on the screen
as below.
Figure 4-6 LAN
¾
MAC Address - The physical address of the Router, as seen from the LAN. The value can't
be changed.
¾
IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.1.1).