Vista Imaging Vista Routing 用户手册

Configuring Routing 

Routing User Guide 

6 

Press

 <Enter> 

to cycle though the rest of the prompts and to exit the program. 

This section covers the following topics: 

ƒ

ƒ

ƒ

ƒ

This section assumes that you have prepared your routing rules as described in the 
previous chapter. 

Routing rules are initially defined in the 

\DICOM\Dict\Route.dic

 file, which is stored 

on the Routing Gateway. This file can be created and modified using any text editing 
program. 

Routing rules take effect after 

Route.dic

 has been imported into a local MUMPS table 

used by the Routing Gateway. 

1 

On the Routing Gateway, use a text editor to open 

x:\DICOM\Dict\Route.dic

, 

where 

x

is the name of the drive used by the Routing Gateway to store dictionary 

files.  

  The first time routing rules are defined; this file will need to be created. If you are 

modifying an existing file, it is recommended that you create a backup copy of the 
file. 

2 

Enter your rules. 

 

Route.dic 

must end with a line-feed. To ensure proper termination of the last 

meaningful line, add a comment-line after the last routing rule, such as: 

# last update on 1 April 2003

# end of file 

3 

Save the file into the directory noted in Step 1.  

  When using programs such as Microsoft Word, make sure that the file is saved in 

“text only” mode.  

  Confirm that the file extension is not changed by the text editor. The file will only 

be imported if it is named 

Route.dic

 and if it is stored in the proper directory. 

VistA Imaging V. 3.0, Patch 18

April 2006 

44