ZyXEL Communications nbg-418n 用户手册
NBG-418N User’s Guide
97
C
H A P T E R
9
DHCP Server
9.1 Overview
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-418N’s LAN as a
DHCP server or disable it. When configured as a server, the NBG-418N provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
your LAN, or else the computer must be manually configured.
obtain TCP/IP configuration at start-up from a server. You can configure the NBG-418N’s LAN as a
DHCP server or disable it. When configured as a server, the NBG-418N provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
your LAN, or else the computer must be manually configured.
9.2 What You Can Do
• Use the General screen to enable the DHCP server (
).
• Use the Advanced screen to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses (
).
• Use the Client List screen to view the current DHCP client information (
9.3 What You Need To Know
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. Find out the MAC addresses of your network devices if you intend to add them
to the DHCP Client List screen.
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. Find out the MAC addresses of your network devices if you intend to add them
to the DHCP Client List screen.
Refer to the
section for information on System DNS Servers.
9.4 General Screen
Use this screen to enable the DHCP server. Click Network > DHCP Server. The following screen
displays.
displays.