ZyXEL Communications NBG-418N v2 用户手册

 Chapter 6 Wireless LAN

NBG-418N v2 User’s Guide

The following table describes the labels in this menu.

Use this screen to allow intra-BSS networking and set the RTS/CTS Threshold.

Click Network > Wireless LAN > Advanced. The screen appears as shown.

Network > Wireless LAN > Advanced (Universal Repeater Mode) 

The following table describes the labels in this screen. 

Network > Wireless LAN > MAC Filter

Active

Click Active check box to enable MAC address filtering.

MAC Address 
(White List)

This field shows the MAC addresses of the wireless station that are allowed or denied access 
to the NBG-418N v2 in these address fields. Enter the MAC addresses in a valid MAC address 
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Select

Click the Select radio button to select a MAC filter entry.

Delete

Click the Delete button to delete the selected MAC filter entry.

Delete All

Click the Delete All button to remove all MAC filter entries.

MAC Address

Enter the MAC addresses of the wireless station that are allowed or denied access to the 
NBG-418N v2 in these address fields. Enter the MAC addresses in a valid MAC address 
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

Add

Click Add to add a new MAC address to the MAC Filtering rule.

Apply

Click Apply to save your changes back to the NBG-418N v2.

Reset

Click Reset to reload the previous configuration for this screen.

Network > Wireless LAN > Advanced (Universal Repeater Mode)

Wireless Advanced Setup

Tx Power

This field controls the transmission power of the NBG-418N v2. When using the NBG-
418N v2 with a notebook computer, select a transmission power level from the drop-
down list. Choose a lower transmission power level when you are close to the AP in order 
to conserve battery power.