ZyXEL Communications VSG-1200 V2 用户手册
VSG-1200 V2 User’s Guide
Chapter 23 Private LAN
168
C
H A P T E R
23
Private LAN
This chapter shows you how to set up a private LAN that allows specified devices to
communicate with each other.
communicate with each other.
23.1 Private LAN Overview
By default the IP Plug and Play (iPnP) and layer-2 isolation features (see
) are enabled to prevent devices on the LAN from communicating with each other.
These features provide additional security protection.
However, you can configure a private LAN to allow communication between devices with the
specified IP addresses in the Private LAN screen. The VSG does not apply iPnP or layer-2
isolation on the devices in a private LAN.
specified IP addresses in the Private LAN screen. The VSG does not apply iPnP or layer-2
isolation on the devices in a private LAN.
The following figure shows a network example where computers A and B can communicate
with each other in the private LAN. Since computers C and D are not in the private LAN, the
VSG disallows communication between the two.
with each other in the private LAN. Since computers C and D are not in the private LAN, the
VSG disallows communication between the two.
Figure 112 Private LAN Network Example
23.2 Configuring a Private LAN
To specify the IP address(es) to belong to the private LAN, click Advanced and Private LAN
in the navigation panel.
in the navigation panel.
A
Private LAN
B
C
D
Internet