ZyXEL Communications VSG-1200 V2 用户手册
VSG-1200 V2 User’s Guide
203
Chapter 30 Firmware
4 Specify the firmware file name in the Local PC File Path field (or click Browse to locate
it).
5 Click Apply to start the file transfer process.
6 When the file transfer is completed successfully, the following message displays and the
VSG automatically restarts to complete the firmware upgrade process.
Figure 144 Web Configurator: Firmware Upgrade Successful
7 After the VSG finishes restarting, access the web configurator again. Check the firmware
version number in the System Status screen.
30.2.1 Manual Firmware Upgrade via a TFTP Server
Follow the steps below to upload the firmware using the web configurator.
1 Download the latest firmware from www.zyxel.com and store it in a TFTP server. Unzip
the file if it is zipped.
2 Run a TFTP server program and specify the location of the firmware file and the
communication mode. Refer to the documentation that comes with your TFTP server
program for instructions.
program for instructions.
3 Access the web configurator. Refer to the section on accessing the web configurator for
instructions.
4 Click System Tools, Firmware and the Manual Firmware Upgrade link to display the
screen as shown.
Figure 145 Firmware: Manual Upgrade Using TFTP
5 Specify the IP address of the TFTP server in the TFTP Server IP Address field.
6 Specify the name of the firmware file in the Binary File Name field.
7 Click Apply to start the file transfer process.
8 When the file transfer is completed successfully, the following message displays and the
VSG automatically restarts to complete the firmware upgrade process.
9 After the VSG finishes restarting, access the web configurator again. Check the firmware
version number in the System Status screen.