ZyXEL Communications VSG-1200 V2 用户手册
VSG-1200 V2 User’s Guide
Chapter 33 Troubleshooting
230
C
H A P T E R
33
Troubleshooting
This chapter covers potential problems and possible remedies. After each problem description,
some instructions are provided to help you to diagnose and to solve the problem.
some instructions are provided to help you to diagnose and to solve the problem.
33.1 Using the LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
33.1.1 The Power LED
The LED on the front panel does not light up.
33.1.2 The LAN Port LEDs
None of the LEDs for the
LAN port(s) light up when connected to an Ethernet device.
Table 79 Troubleshooting the Power LED
STEPS
CORRECTIVE ACTION
1
Check the connections from the VSG to the power source. Make sure you are using the
supplied power cord and proper power supply. Refer to the appendix on product
specifications.
2
Make sure the power source is turned on and that the VSG is receiving sufficient power.
3
If these steps fail to correct the problem, contact your local distributor for assistance.
Table 80 Troubleshooting the LAN LED
STEPS
CORRECTIVE ACTION
1
Make sure you are using the correct Ethernet cable. Connect the LAN port to a hub/switch
using a crossover Ethernet cable or directly to a computer using a straight-through Ethernet
cable.
2
Verify that the attached device(s) is turned on and properly connected to the VSG.
3
Verify that Ethernet cable length does not exceed 100 meters.
4
Make sure the network adapters are working on the attached devices.