Alcatel Carrier Internetworking Solutions Switch/Router 用户手册
WAN Modules
Page 3-33
WSX-FT1/E1-SC Technical Specifications
Number of ports
1 or 2 T1 or E1 ports
1 or 2 Universal Serial ports
1 or 2 Universal Serial ports
Connector Types
T1/E1: RJ-48C
Serial: High-density, 26-pin shielded
Serial: High-density, 26-pin shielded
Standards Supported
RFCs 1406, 1213, 1659
Frame Formats
T1: Superframe, Extended Superframe, Unframed
E1: E1, E1-CRC, E1-MF, E1-CRC-MF, Unframed
E1: E1, E1-CRC, E1-MF, E1-CRC-MF, Unframed
Line Coding
T1: B8ZS or AMI
E1: HDB3 or AMI
E1: HDB3 or AMI
Data Rates Supported
T1: 1.544 Mbps
E1: 2.048 Mbps
Serial: 56, 64, 128, 256, 384, 512, 768, 1024, 1536,
E1: 2.048 Mbps
Serial: 56, 64, 128, 256, 384, 512, 768, 1024, 1536,
1544, 2048 Kbps
Compression
Hardware-based using STAC 9705
Facility Datalink Protocol
ANSI T1.403 and AT&T 54016
MAC Addresses Supported
4,096
Connections Supported
Physical Data Terminal Equipment (DTE) or
Data Communication Equipment (DCE)
Data Communication Equipment (DCE)
Cable Supported
Serial Ports
DTE or DCE of the following types:
R2-232, V.35, X.21, RS-530, RS-449
R2-232, V.35, X.21, RS-530, RS-449
Cable Distance
T1/E1 (short haul): 200 meters
T1/E1 (long haul): 1829 meters
T1/E1 (long haul): 1829 meters
Power Consumption
WSX-FT1/E1-SC-1W without an HRE-X: 5.75 amps
WSX-FT1/E1-SC-1W with an HRE-X: 7.25 amps
WSX-FT1/E1-SC-1W with an HRE-X: 7.25 amps
WSX-FT1/E1-SC-2W without an HRE-X: 7.25 amps
WSX-FT1/E1-SC-2W with an HRE-X: 8.75 amps
WSX-FT1/E1-SC-2W with an HRE-X: 8.75 amps