Alcatel Carrier Internetworking Solutions Switch/Router 用户手册
Boot Prompt Basics
Page A-3
Boot Prompt Basics
To get a list of commands enter a question mark (
?
). A screen similar to the following is
shown:
?
- print this list
@
- boot (load and go)
p
- print boot params
c
- change boot params
l
- load boot file
g adrs
- go to adrs
d adrs[,n]
- display memory
m adrs
- modify memory
f adrs, nbytes, value
- fill memory
t adrs, adrs, nbytes
- copy memory
e
- print fatal exception
n netif
- print network interface device address
L
- list ffs files
P
- Purge system: removes ALL ffs files
R file [files]
- remove ffs file(s)
S
- save boot configuration
V
- display bootstrap version
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
Boot flags:
0x02
tn=targetname s=script o=other
Boot flags:
0x02
- load local system symbols
0x04
- don't autoboot
0x08
- quick autoboot (no countdown)
0x20
- disable login security
0x40
- use bootp to get boot parameters
0x80
- use tftp to get boot image
0x100
- use proxy arp
0x1000
- factory reset
available boot devices: sl ffs zm
[Boot]:
[Boot]:
The commands for this menu are described in the sections below.
♦ Important Note ♦
The Boot prompt is case sensitive. Always enter letters
in lowercase or uppercase as indicated in the menus.
in lowercase or uppercase as indicated in the menus.
Resuming Switch Boot (@)
If you wish to continue the boot process, enter the @ command at the prompt. This loads the
last saved configuration.
last saved configuration.