Alcatel Carrier Internetworking Solutions Switch/Router 用户手册

Page 9-16

You may want to clear statistics for a specific module, port or service for dialogistic or 
accounting purposes. To clear switch statistics enter

at the system prompt. A screen similar to the following will display.

As indicated in the prompt, you can clear all statistics from a module by entering the slot 
number as shown here:

This entry will clear all statistics for the module located in slot 3. If you want to clear statistics 
for a specific port, service or instance, enter the 

 command followed by the appropri-

ate numbers. You must use a comma (

) to separate the slot number from the port, service 

and instance numbers. The following command will clear all statistics for port 1 of the 
module located in slot 3.

♦ Caution♦

When the 

 command is used, no notification is 

sent to the SNMP manager about the cleared statistics. 
Use of this command can cause unpredictable results 
with your NMS statistics.