Alcatel Carrier Internetworking Solutions Switch/Router 用户手册

Page 15-13

After you create an OmniChannel with the 

 command, you can add more secondary 

ports to the same channel as long as the channel contains less than 4 ports. You use the 

 command to add ports to an OmniChannel. Follow these steps:

1. Enter 

. 

2. The following prompt displays:

Enter the channel number to which you want to add secondary ports. You can check the 
current port assignments for a given OmniChannel by using the 

 command, which 

3. The following prompt displays:

Enter the additional ports that will be part of this OmniChannel. All the ports you enter 
will initially be secondary ports (i.e., they do not participate in the Spanning Tree algo-
rithm and are used for data transmission only). You can specify up to 4 ports on an 
OmniChannel; only 3 of the ports can be secondary ports.

. To specify a range of ports, enter the slot number, a slash (/), 

the port number for the first secondary port, a dash (-), and the port number for the last 
secondary port. For example, to specify ports 3, 4, and 5 on the Fast Ethernet module in 
slot 2 as secondary ports in an OmniChannel, you would enter:

. To specify multiple ports (on the same module) that are not phys-

ically contiguous, enter the slot number, a slash (/), the port number for the first second-
ary port, a comma (,), and the slot and port for the next secondary port. For example, to 
specify ports 3 and 5 on the Fast Ethernet module in slot 2, you would enter:

Messages will display, informing you that secondary ports were saved in flash memory:

You can delete any existing OmniChannel through the 

 command. Follow these steps:

1. Enter 

.

2. The following prompt displays:

Enter the channel number that you want to delete. You can obtain information on a 
channel through the 

 and the channel, along with all port assign-

ments, will be deleted.