Black Box LWE100A-KIT 用户手册
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 35
Chapter 5: Advanced Settings
Preamble Type
It defines some details on the 802.11 physical layer. “Long” and “Auto” are available.
IGMP Snooping
Available in AP/Router mode, IGMP snooping is the process of listening to IGMP network traffic. When IGMP snooping is
enabled, the AP will listen to IGMP membership reports, queries, and leave messages to identify the ports that are members of
multicast groups. Multicast traffic will only be forwarded to ports identified as members of the specific multicast group or groups.
enabled, the AP will listen to IGMP membership reports, queries, and leave messages to identify the ports that are members of
multicast groups. Multicast traffic will only be forwarded to ports identified as members of the specific multicast group or groups.
RIFS
RIFS (Reduced Interframe Spacing) is a means of reducing overhead and thereby increasing network efficiency.
Link Integration
Available under AP/Bridge/AP repeater mode. Check “Enable” to monitor the Ethernet port connection. It can inform the
associating wireless clients as soon as it disconnects.
associating wireless clients as soon as it disconnects.
TDM Coordination
Time-Division Multiplexing Technique (TDM) helps avoid packet collisions and sends the packets much more efficiently while
enabling higher effective throughput rates. This function is only available in AP/CPE mode. We recommend that you enable TDM
coordination when multiple extenders will connect to the AP in your application.
enabling higher effective throughput rates. This function is only available in AP/CPE mode. We recommend that you enable TDM
coordination when multiple extenders will connect to the AP in your application.
LAN2LAN CPE
LAN2LAN CPE mode enables packet forwarding at the Layer 2 level. It is transparent for all the Layer 2 protocols.
Space in Meters
To decrease the chances of data retransmission at long distances, the Wireless P-T-P Ethernet Extender can automatically adjust
the proper ACK timeout value by specifying the distance between the two nodes.
the proper ACK timeout value by specifying the distance between the two nodes.
Flow Control
This enables the administrator to specify the incoming and outgoing traffic limit by checking “Enable Traffic Shaping.” This is only
available in Router mode.
available in Router mode.
NOTE: We strongly recommend that you leave most advanced settings at their defaults except “Distance in Meters.” Adjust the
parameter for real distance; any modification may negatively impact the performance of your wireless network.
5.2 Wireless Security Settings
To prevent unauthorized radios from accessing data transmitting over the connection, the Wireless P-T-P Ethernet Extender has
rock-solid security settings.
rock-solid security settings.
5.2.1 Data Encryption and Authentication Settings
Open “Profile Setting” in “Wireless” and enter “VAP Profile 1 Settings.”