Black Box LWE100A-KIT 用户手册

724-746-5500 | blackbox.com

Page 37

Chapter 5: Advanced Settings

Data Encryption

If data encryption is enabled, the key is required and only other devices using the the same key can communicate with each other.

None: Available only when the authentication type is open system.

64 bits WEP: Consists of 10 hexadecimal numbers.

128 bits WEP: Consists of 26 hexadecimal numbers.

152 bits WEP: Consists of 32 hexadecimal numbers.

TKIP: Temporal Key Integrity Protocol, which is a kind of dynamic encryption, is co-used with WPA-PSK, etc.

AES: Advanced Encryption Standard; it is usually co-used with WPA2-PSK, WPA, WPA2, etc.

TKIP + AES: It allows for backwards compatibility with devices using TKIP.

NOTES:

We strongly recommend that you enable wireless security on your network.

You can establish communicaton only by setting the same Authentication, Data Encryption, and Key in the Wireless P-T-P Ethernet
Extender and other associated wireless devices.

5.2.2 Access Control

Access Control enables the wireless client to access the Wireless P-T-P Ethernet Extender, so a further security mechanism is
provided. This function is available only under AP mode.

Open “Access Control” in “Wireless” as below.

Figure 5-3. Access Control.

Access Control Mode

If you select “Allow Listed,” only those clients whose wireless MAC addresses are in the access control list will be able to connect
to your AP. While when “Deny Listed” is selected, those wireless clients on the list will not be able to connect the AP.