Runco SC-1 用户手册
Runco SC-1 Owner’s Operating Manual
89
PRE
L
IMINAR
Y
Figure 5-2. Installing A New Lamp
12. Rest the anode (+) end of the lamp on the lamp cradle as shown in Figure 5-2. Then,
slip the positive lamp connector over the bulb end.
13. Tighten the set screws in both negative and positive lamp connectors; see Figure 5-3.
If you accidentally touch the quartz body of the lamp with your bare hands, clean the
surface as described in Maintenance and Cleaning on page 85.
surface as described in Maintenance and Cleaning on page 85.
Figure 5-3. Securing Lamp Anode (+) and Cathode (-) Connectors