Sanyo PLC-XD2600 用户手册

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT

OFF.

Power off? disappears after 4 seconds.

Press the ON/STAND-BY button on the top control or

on the remote control, and

Power off? appears on the

screen.
Press  the  ON/STAND-BY  button  again  to  turn  off  the

projector. The POWER indicator starts to blink red, and

the cooling fans keep running. (You can select the level

of fans’ quietness and speed. See “Fan” on page 56.)

At this time, you can unplug the AC power cord even if

the fans are still running.

When  the  projector  has  cooled  down  enough,  the

POWER  indicator  stops  blinking  and  you  can  turn  on

the projector.

✔

 • When the Direct on function is set to

On, the projector

will  be  turned  on  automatically  by  connecting  the AC

power cord to an AC outlet (p.50).

 • The running speed of cooling fans is changed according

to the temperature inside the projector.

 • Do not put the projector in a case before the projector is

cooled enough.

 • If the WARNING indicator blinks or lights red, see

“WARNING indicator” on page 59.

 • While the POWER indicator is blinking, the lamp is being

cooled down and the projector cannot be turned on. Wait

until the POWER indicator stops blinking to turn on the

projector again.

• The  fan  rotation  will  terminate  directly  if  the AC  power

cord  is  unplugged  immediately  after  the  projector  is

turned off.

• The  projector  can  be  turned  on  after  the  POWER

indicator  turns  red. The  waiting  time  to  restart  will  be

shortened when the normal power-off processing for fan

   cooling  is  completed,  compared  with  the  time  the AC

power  cord  is  immediately  unplugged  after  the  power-

off.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF THE

PROJECTOR AND LET STAND FOR ABOUT AN

HOUR IN EVERY 24 HOURS.

✔

 • When using the Direct OFF function, you

cannot  restart  the  projector  immediately

after  the  power  is  disconnected.  If  the

external  power  supply  is  suddenly  cut

off,  the  fan  stops  immediately. The  lamp

remains  high  temperature  and  needs  to

be cooled.

You can disconnect the power cord from the

wall outlet or turn off the breaker even during

projection without pressing the on/stand-by

button.