Sanyo PLC-XD2600 用户手册

The preparation display will disappear

after 30 seconds.

(See page 53 for Lamp control status.)

Connect the projector’s AC power cord into an AC

outlet. The POWER indicator lights red. Open the lens

cap (see pages 8, 61).
Press the ON/STAND-BY button on the top control or

on the remote control. The POWER indicator lights

green and the cooling fans start to operate. The

preparation display appears on the screen and the

countdown starts.

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

✔

  The Filter warning and Lamp replacement

icons may appear on the screen

depending on the usage state of the

projector.

Lamp control status

After the countdown, the input source that was selected

the last time and the lamp control status icon (see page

53) appear on the screen.

✔

 • When the Logo select function is set to

Off, the logo will

not be shown on the screen (p.46).

 • When

Countdown off or Off is selected in the Display

function,  the  preparation  display  will  not  be  shown  on

the screen (p.45).

 • When the Input Search function is set to

On2, the input

signal will be searched automatically (p.44).

 • When

Off is selected in the Display function, the Video/

PC  selection  window  and  the  input  signal  guidance

window are not shown on the screen. (p.45)

If there is no signal input when start on the projector,

or the current signal is missed while operating the

projector, the Video/PC selection window will be

displayed on the screen, please move the pointer to

input source desired by pressing the Point ▲▼ buttons

and press the SELECT button. And then follow the

input signal guidance window to correct the signal and

connection.

If the projector is locked with a PIN code, PIN code input

dialog box will appear. Enter the PIN code as instructed

on the next page.

No signal

Current Input setting:Video

Is  signal  processed  correctly?

Is  cable  connected  properly?

No signal

Current Input setting:RGB

Is  signal  processed  correctly?
Is  cable  connected  properly?