Toshiba 3511 用户手册

e-STUDIO3511/4511 ADJUSTMENT

3 - 2

November 2003 © TOSHIBA TEC

3.2 Adjustment of the Auto-Toner Sensor

When the developer material is replaced, adjust the auto-toner sensor in the following procedure.

(1)

Install the cleaner and developer unit.

Note:

Do not install the toner cartridge.

(2)

While pressing [0] and [5] simultaneously, turn the power ON. The following message will be

displayed.

100%

TEST MODE

[0] [5]

[POWER]

→

(3)

Key in a code and press the [START] button.

Code 200: All developer materials 201: Developer material Y

202: Developer material M

203: Developer material C

204: Developer material K

206: Developer material Y, M, C

(4)

Adjustment for “K” (Magnetometric sensor control)

• The following message will be displayed approx. 2 minutes later.

100%

200

TEST MODE

(Code)

→ [START]

→

K: xxxV

K: zzzV

(B)

→

(C)

→

(A)

→

(B): Current sensor voltage (V)

(C): No display

(A): Target values (V) for adjustment reference

voltage

Note:

The current sensor voltage (V) shown in (B) automatically changes, gradually approaching the

target value for adjustment reference voltage shown in (A).