Xerox Phaser 3260DNI 用户手册

Common Problems

Xerox® Phaser® 3052/3260

User Guide

145

Common PostScript Problems

The following situations are PS language specific and may occur when several printer languages are 
used.

Horizontal stripes

If horizontally aligned black lines, stripes, streaks or smears appear:
• The toner cartridge may not be installed properly. Remove the cartridge and reinsert 

it.

• The toner cartridge may be defective. Remove the toner cartridge and install a new 

one. (See 

Replacing the Toner Cartridge

.)

• If the problem persists, the machine may require repair. Contact a service 

representative.

An unknown image 
repetitively 
appears on a few 
sheets, or loose 
toner, light print, or 
contamination 
occurs.

• Your machine is probably being used at an altitude of 1,500 m (4,921 ft) or above. 

The high altitude may affect the print quality, such as loose toner or light imaging. 
Change to the correct altitude setting for your machine. (See 

System Setup

.)

PostScript file cannot be printed.

The PostScript driver may not be 
installed correctly.

• Install the PostScript driver. 

(See 

Install Printer Software.

)

• Print a configuration page and 

verify that the PS version is 
available for printing.

• If the problem persists, contact 

a service representative.

Limit Check Error report prints.

The print job was too complex.

• You might need to reduce the 

complexity of the page. 

A PostScript error page prints.

The print job may not be 
PostScript.

• Make sure that the print job is 

a PostScript job. Check to see 
whether the software 
application expected a setup 
or PostScript header file to be 
sent to the machine.

A a B b C
A a B b C
A a B b C

A a B b C
A a B b C