Xerox 2750 用户手册

2750 op#4 R3.doc  10-02 
 

Page 4-4

 

  
To edit the operator’s program list, select 

 from the 

. The control panel 

displays: 
 

Fold Menu: #2 
Fold Table: 

 

1: Change  4: Quit 

 
NOTE: “Table” = Program number in the folder firmware, see Section 9. 
The #2 menu selection is the first one available for editing because the first selection is always 
STACK, which cannot be changed. To change or delete the selection press 1. The control panel 
displays: 
 

1:  Set By Fold Table # 
2:  Choose from List 
3:  Remove from Menu 
4:  Quit 

 
If you do not know the “table” (fold program), or do not have Section 9 available, press the 2 
button to enter the list, then scroll through to select (press 1 to “Add”). To delete the current fold 
program from the Fold Bank, press the 3 button (this does not erase the program from the 
firmware). Press 4 to return to the previous display. 
   
The maximum number of fold programs that can be included in the operator’s program list 
(NVRAM) is 20. 
 

Displays the last 21 fault conditions, and the number of prints successfully passed between 
events. Event #1 is the most recent. Example: 
 
Event # Error code Quantity 
  1. 

0042 (occurred after)  1957 (prints passed since previous event) 

 2. 

0010 

 4350 

 3. 

F142 

5128 

        

 
 

1. Mechanical counter 
The mechanical (electromagnetic) counter situated below the power switch records 
linear feet. 
 
2. Software sheet counter 
In addition to linear feet displayed by the mechanical counter, the folder also keeps 
track in software of the number of sheets ("clicks") processed. This is displayed in 
the Parameters menu as follows (two lines due to display limitations): 
 
SHEETS (Ks) 

1 4 8 7   = 1,487,000 

SHEETS (1s) 

3 0 5 

305 

 Total 

1,487,305