Ricoh SP 3510DN 用户手册

Setting Name

Value

IPv6 Config.

• IPv6: On
• DHCP: Off
• IP Ad. (DHCP): XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

XXXX *

1

If the DHCP setting is enabled, the IPv6 address obtained
from a DHCP server is displayed.

• Manual Address:

• Manual Address: 0000:0000:0000
• Prefix Length: (0-128) 0
• Gateway Address: 0000:0000:0000:

• Stateless Ad.:

• Address 1: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

XXXX *

1

• Address 2: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

XXXX *

1

• Address 3: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

XXXX *

1

• Address 4: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

XXXX *

1

• Link-local Ad.: XXXX: XXXX: XXXX: XXXX: XXXX *

1

*

1

 "X" indicates a unique address number for your printer.

• If [DHCP] is in use, the IP address, subnet mask, and gateway address are all set automatically.
• Each printer has a unique [MAC Address] value.
• Set the Ethernet speed if necessary.

Specifying an IP Address for IPv4 (No DHCP)

Use the following procedure to assign a specific IP address to the printer with IPv4 protocol. This
procedure is only necessary if you want to use the printer on a network without DHCP, or want to
prevent the printer's IP address from changing.
Before beginning this procedure, make sure you have the IP address, subnet mask, and gateway
address that the printer will use.

4. Configuration

44