Ricoh SP 3510DN 用户手册
Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field,
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.
9.
Use this method to assign Subnet Mask and Gateway Address.
10.
Press the [Menu] key.
11.
If you are requested to restart the printer, turn off the printer, and then turn it back on.
12.
Print a configuration page to confirm the settings made.
Receiving an IP Address for IPv4 Automatically (DHCP)
• When you use this printer protocol in the DHCP environment with IPv4 protocol, select [DHCP]
following this procedure.
• When [DHCP] is selected, you cannot make settings for the following items:
• IP Address
• Subnet Mask
• Gateway Address
• Subnet Mask
• Gateway Address
• Consult your network administrator for information about making network settings.
1.
Press the [Menu] key.
CMC034
2.
Press the [ ] or [ ] key to display [Host Interface], and then press the [OK] key.
Menu:
Host Interface
Host Interface
4. Configuration
46