Lexmark 752 用户手册
24
Install memory, firmware, or option cards
Installing a memory card
Follow the instructions in this section to
install a printer memory card. Memory
cards must have 168-pin connectors.
install a printer memory card. Memory
cards must have 168-pin connectors.
Note:
Some memory options offered for other Lexmark
printers cannot be used with your printer. Refer to the
publications CD for memory specifications.
publications CD for memory specifications.
1
Remove the system board access
cover (see Page 22).
cover (see Page 22).
Warning:
Memory cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch a card.
you touch a card.
2
Unpack the memory card.
Avoid touching the connection
points along the edge of the card.
Save the packaging.
points along the edge of the card.
Save the packaging.
3
Push open the latches on both
ends of the memory connector.
ends of the memory connector.
4
Align the notches on the bottom of
the card with the notches on the
connector.
the card with the notches on the
connector.
5
Push the memory card firmly into
the connector until the latches on
either end of the connector snap
into place.
the connector until the latches on
either end of the connector snap
into place.
It may require some force to fully
seat the card.
seat the card.
6
Make sure each latch fits over the
notch on the end of the card.
notch on the end of the card.
Latch
Notch
Connection points
What do I do now?
Task
Go to page…