Lexmark 752 用户手册
26
Install memory, firmware, or option cards
Installing a hard disk
Follow the instructions in this section to
install an optional hard disk. You need a
small Phillips screwdriver to attach the
hard disk to the mounting plate.
install an optional hard disk. You need a
small Phillips screwdriver to attach the
hard disk to the mounting plate.
Warning:
Hard disks are easily damaged by static
electricity. Touch something metal on the printer before
you touch a disk.
you touch a disk.
If an option card has been installed, you
may need to remove it before installing
the hard disk.
may need to remove it before installing
the hard disk.
1
Remove the system board access
cover (see Page 22).
cover (see Page 22).
2
Remove the mounting plate, hard
disk, ribbon cable, and attachment
screws from the package.
disk, ribbon cable, and attachment
screws from the package.
3
Align the ribbon cable connector
with the connector pins on the
hard disk.
with the connector pins on the
hard disk.
4
Attach the ribbon cable to the hard
disk.
disk.
5
Align the screw holes on the
mounting plate with the holes in
the hard disk.
mounting plate with the holes in
the hard disk.
6
Secure the mounting plate to the
hard disk with the screws.
hard disk with the screws.
Hard disk
Ribbon cable
Mounting plate