Lexmark 1200 用户手册

Loading paper in the trays

the operator panel, MarkVision, or the printer 
driver before sending the job to print.

If you are printing a job using manual feed, send the 
job to the printer and then wait for the 

 

message to appear on the display before you place 
media in the multipurpose feeder.

Print transparencies only after warming the printer 
by printing a job on paper (such as the menu set-
tings page you can print from the Tests Menu).

The procedure for loading paper in all the trays (the stan-
dard 250-sheet tray and the optional 250-sheet trays) is the 
same. Refer to the Setup Guide for detailed instructions.

The printer lets you know when you need to load paper in 
the trays. If a tray has less than 50 sheets of paper, the 

status message appears on the display. Press 

 or 

 to open the Supplies Menu, and then 

scroll through the list of supplies that need attention. The 
menu indicates whether a tray is missing, low on paper, or 
empty.

When you change the paper in the tray, make sure the 
paper guides are in the correct positions. The position of 
the rear paper guide informs the printer of the size paper 
loaded in the tray. Feeding paper when the rear paper 
guide is not in the correct position may result in misfeeds 
or paper jams.

If you load a different type of media, change the Paper 
Type setting in the Paper Menu. Selecting the correct 
paper type guarantees optimal print quality for that 
media. See “Media guidelines” on page 74 for information 
about the changes the printer makes for specific media. 
For more information about changing the Paper Type set-
ting, see page 18 or refer to the Setup Guide. 

The paper size and the paper type also must be set cor-
rectly for tray linking to work as expected. See page 82 for 
more information about tray linking.