Lexmark 1200 用户手册
83
Using the multipurpose feeder
Using the
multipurpose
feeder
The multipurpose feeder holds 100 sheets of paper,
30 transparencies, 30 sheets of labels, or 15 envelopes.
Refer to the Setup Guide for instructions for loading media
in the multipurpose feeder.
30 transparencies, 30 sheets of labels, or 15 envelopes.
Refer to the Setup Guide for instructions for loading media
in the multipurpose feeder.
If you want to use the multipurpose feeder like you use
the other trays, make sure the Configure MP menu item in
the Paper Menu is set to Cassette.
the other trays, make sure the Configure MP menu item in
the Paper Menu is set to Cassette.
You can also use the multipurpose feeder to manually
feed a single sheet or envelope. See page 85 for more infor-
mation about manual feed.
feed a single sheet or envelope. See page 85 for more infor-
mation about manual feed.
Printing from the
multipurpose feeder
Since the multipurpose feeder does not have auto size
sensing, you must select the correct paper size and type
from the printer operator panel or from MarkVision before
you send a job to print.
sensing, you must select the correct paper size and type
from the printer operator panel or from MarkVision before
you send a job to print.
1
Select MP Feeder as the paper source.
From the printer operator panel or from MarkVi-
sion:
sion:
a
Press
Menu>
or
<Menu
to enter the menus.
Paper Menu
appears on the second line of the dis-
play.
b
Press
Select
to open the Paper Menu.
The
Paper Source
menu item appears on the sec-
ond line of the display.
c
Press
Select
to select Paper Source.
d
Press and release
Menu>
until
MP Feeder
appears
on the second line of the display.
e
Press
Select
to set the multipurpose feeder as
the paper source.