Konica Minolta 752 用户手册
5-4.When Film Fails to be Loaded
62 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
(5) Open the light shield cover of the tray.
(6) Remove the film with the package from the tray.
(7) Push the film and resin tray to the back of the pack-
age.
(8) Insert the trailing edge of the package between the
retaining plate and the taking-up shaft in the same
manner as that of loading the film, and close the
light shield cover completely.
manner as that of loading the film, and close the
light shield cover completely.
After closing the light shield cover, carry the tray out of a dark
room.
room.
(9) Put the tray back to the rail of the main unit, and
press in the tray until it locks.
The normal screen will re-appear after a while when the mes-
sage of "PLEASE WAIT" appears.
sage of "PLEASE WAIT" appears.
(10) Touch [ON/OFF LINE] to switch into OFF LINE.
(11) Touch [MAINTENANCE] to display the mainte-
nance menu screen.
(12) Touch [FILMSET RETRY].
The message for selecting the tray will appear.
Light shield cover
Film
Retaining plate
Light shield cover