用户手册
目录
- 17
- 17
- 17
- 17
- 17
- 28
- 28
- 28
- 28
- Setting the START TIMER function will start up the device from the Standby status automatically, ...30
- Follow the procedure below to set the date and time for the clock in the device. Set the time zon...31
- 34
- 34
- Does not perform the magnification interpolation. But prints out in the MAGNIFICATION setting. Wh...34
- The device has the densitometer in the cooling/discharge section, which allows you to control the...36
- Follow the procedure below to print out the SMPTE pattern in the device used for density control....38
- 39
- 39
- Follow the procedure below to adjust the contrast of the control panel and the brightness of the ...43
- When [ALL CHANNEL QUEUE] is selected, the print data registered by PREVIOUS PRINT or TEST PRINT o...45
- The print preferences are set for each of the diagnostic devices. Follow the procedure below to s...50
- 51
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- 59
- The screen on the right shows an example where the film cannot be transported from the tray and i...65
- The screen on the right shows the example where a film jam occurs between the decent transport se...66
- The screen on the right shows the example where a film jam occurs between the elevator transport ...67
- The screen on the right shows the example where a film jam occurs between the HPRO section (in th...68
- 79
- 79
- 79
- 79
- 79
- 79
- 79
- 79
- 79
- 79
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83
- 83