Genicom PC4 用户手册

Label Taken Sensor

The built-in Label Taken Sensor (LTS) can be enabled to hold the 

printing until the previous label (or similar) has been removed from the 

printer's outfeed slot. As long as the sensor detects a label, the printer 

will be BUSY and cannot receive data from host. 
If using the ESim protocol described in the ESim v6.XX, Programmer’s 

Reference Manual, note the following:
•  The LTS can be enabled/disabled manually using the switch next to 

the sensor (see below) or in the ESim protocol by an O command.

•  When switching between peel-off, tear-off operation and cut-off 

operation, the media feed must be readjusted by means of a j com-

mand.

The Intermec InterDriver provides options for selecting the following 

modes of operation without any j or O commands having to be entered 

by the operator:
•  Tear-off
•  Peel-off with LTS enabled 
•  Peel-off with LTS disabled