Genicom PC4 用户手册

Tear-Off Operation

  Open the printer's top cover by pressing the release buttons on both 

sides and folding the cover upwards/rearwards.

  Pull up the spindle and remove possible remaining media or empty 

label roll core.

  Place the spindle into the core of a fresh media roll. Rotate the spindle 

according to the inner diameter of the media roll core (see markings 

on the spindle).

  Wind the green edge guide wheel towards the front of the printer so 

you can fit the media roll between the guides.

  Place the media roll and spindle in the media compartment and snap 

the spindle into the slots on either side. 

  Wind the green edge guide wheel towards the rear of the printer so 

the rear edge guides just touch the roll without actually breaking its 

rotation.