Zebra Technologies P1043301-005 用户手册

下载
页码 164
37
Installation
Internal ZebraNet 10/100 Print Server
11/21/13
P1043301-005 
Internal ZebraNet 10/100 Print Server
To install an internal ZebraNet 10/100 Print Server, see the installation instructions on the 
Connectivity Solutions CD.
Wireless Print Servers
To install a wireless print server, see the installation instructions on the Connectivity Solutions 
CD.
Install a Radio Card in a Wireless Print Server
Printers that have the wireless option board installed can use any of the wireless radio cards or 
Compact Flash wireless radio cards listed in 
. This 
section provides instructions for installing either type of card. Most printers use a clear plastic 
RF cover over the wireless radio card or compact Flash wireless radio card.
Wireless Radio Card
This section applies to PCMCIA or CardBus wireless radio cards.
To install a wireless radio card, complete these steps:
1.
Turn off (O) the printer.
2.
Remove and discard the metal cover that was shipped in place over the wireless option 
card slot on the back of the printer.
Note • This section applies only to the ZebraNet Wireless Print Server and the ZebraNet 
Wireless Plus Print Server. All other Zebranet wireless print servers have a built-in radio.
Note • Z4Mplus, R4Mplus, and Z6Mplus printers do not support CardBus wireless radio 
cards.