Zebra Technologies Z4Mplus 用户手册

56

 

Z4Mplus and Z6Mplus User Guide

Load the Ribbon

1. If the ribbon has not run out, break it between the strip plate and the ribbon take-up 

spindle.

2. While turning the ribbon take-up spindle release knob counter clockwise, squeeze 

the ribbon against the ribbon take-up spindle tension blades.

3. When the tension blades collapse into the ribbon take-up spindle, hold the release 

knob and rotate the spent ribbon toward the rear of the printer. Then, slide off the 
ribbon.

Note • Do not cut the ribbon on the ribbon take-up spindle. This may damage the 
spindle.