Zebra Technologies Z4Mplus 用户手册

58

 

Z4Mplus and Z6Mplus User Guide

Configuration

After you have installed the media and ribbon, and the Power-On Self Test (POST) is 
complete, the front panel displays PRINTER READY. If the printer fails its POST, see 

. Use the front panel display and the four keys directly 

below it to set printer parameters for your application.

1. Press SETUP/EXIT:

2. Press PLUS (+) or MINUS (–) to scroll to the setting you wish to change.

3. Press SELECT to toggle the functionality of PLUS (+) and MINUS (–) keys.

4. Press PLUS (+) or MINUS (–) to increase or decrease the value, answer yes or no, 

print a label, or select the digit you wish to change.

5. Press SELECT again to use PLUS (+) and MINUS (–) to scroll to the desired 

menu item.

Note • Printers operating on an IP network can be quickly configured using 
ZebraLink WebView (optional ZebraNet PrintServer II required). For information, 
see PrintServer II User and Reference Guide (Zebra part number 45537L).

Note • An asterisk (*) in the upper left-hand corner of the display indicates that the 
value displayed is different than the currently stored value.