Lenovo 4088 用户手册
Diagnostic Error Code
FRU/Action
000-038-XXX BIOS Extension failure
1. Flash the system. See “Updating (flashing) BIOS
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error
1. Flash the system. See “Updating (flashing) BIOS
2. System board
000-195-XXX BIOS Test aborted by user
Information only Re-start the test, if necessary
000-196-XXX BIOS test halt, error threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 43
the Setup Utility” on page 43
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX BIOS test aborted
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 43
the Setup Utility” on page 43
2. Flash the system and retest. See “Updating (flashing)
3. Go to “Undetermined problems” on page 69
000-199-XXX BIOS test failed, cause unknown
1. Go to “Undetermined problems” on page 69
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX BIOS APM failure
1. Flash the system. See “Updating (flashing) BIOS
2. System board
000-270-XXX BIOS ACPI failure
1. Flash the system. See “Updating (flashing) BIOS
2. System board
001-000-XXX System Test Passed
No action
001-00X-XXX System Error
System board
001-01X-XXX System Error
System board
001-024-XXX System Addressing test failure
System board
001-025-XXX System Checksum Value error
1. Flash the system. See “Updating (flashing) BIOS
2. System board
001-026-XXX System FLASH data error
1. Flash the system. See “Updating (flashing) BIOS
2. System board
Chapter 7
.
Symptom-to-FRU index
49