Brady 200M-e 300 用户手册
Bradyprinter 200M-e and 200M-e 300 User’s Guide
15
&RQILJXULQJWKH3ULQWHU
The configuration procedure in Table 1 contains the information you need
to get your printer up and running, but it is not comprehensive. Refer to
page 41 for more information.
to get your printer up and running, but it is not comprehensive. Refer to
page 41 for more information.
• Enter the configuration mode by pressing the
SETUP/EXIT key at the “PRINTER READY” display.
NOTE: You need to press the NEXT/SAVE key
more than once to advance to some of the displays.
more than once to advance to some of the displays.
• To increase the value, answer “yes,” indicate “on,” or
move to the next selection, use the (+) key.
• To decrease the value, answer “no,” indicate “off,” or
return to the previous selection, use the (–) key.
NOTE: When changing parameters, an asterisk (*)
in the upper left-hand corner of the display indicates that you have
changed this setting from the setting that is currently stored in
memory.
in the upper left-hand corner of the display indicates that you have
changed this setting from the setting that is currently stored in
memory.