Brady 200M-e 300 用户手册
Bradyprinter 200M-e and 200M-e 300 User’s Guide
19
3ULQWLQJD7HVW/DEHO
To print a test label:
1. Turn off the printer.
2. Press and hold the CANCEL key
while turning on the printer.
A configuration label showing the
printer’s currently stored parameters
prints (similar to the one shown in
Figure 11).
printer’s currently stored parameters
prints (similar to the one shown in
Figure 11).
If you encounter any problems while
you are configuring or calibrating the
printer or printing a test label, refer to
“Troubleshooting” beginning on
page 71. Otherwise, refer to
“Establishing Communication”
beginning on page 21 to set up the
communication parameters.
you are configuring or calibrating the
printer or printing a test label, refer to
“Troubleshooting” beginning on
page 71. Otherwise, refer to
“Establishing Communication”
beginning on page 21 to set up the
communication parameters.
Figure 11