Brady 260M 用户手册
Front Panel Lights
Refer to Figure 3.1 for the location of the lights.
Note: If an operating condition which causes a light to be ON
constantly and one which causes the same light to Flash
occur simultaneously, the light Flashes.
occur simultaneously, the light Flashes.
Light(LED)
Name
Status
Indication
POWER
ON
Printer is ON.
PRINTHEAD
OFF
Normal operation.
ON
Head Over Temperature condition. Printing stops until the
printhead cools down. Printing resumes automatically.
printhead cools down. Printing resumes automatically.
Printhead Under Temperature condition. Printing continues.
Power Supply Over Temperature condition. Printing stops
until the power supply cools down. Printing resumes
automatically.
until the power supply cools down. Printing resumes
automatically.
Flashing
Printhead Open.
PAPER/
RIBBON
RIBBON
OFF
Media and ribbon (if used) are properly loaded.
ON
Paper out.
Flashing
1. In Thermal Transfer Mode: Ribbon is out.
2. In Direct Thermal Mode: Ribbon is in the printer.
PAUSE
OFF
Normal operation.
ON
Printer has stopped all printing operations.
DATA
OFF
Normal operation, no data being received.
ON
Labels are printing.
Single
flash
flash
The CANCEL key was pressed and a format was
successfully deleted from the print queue.
successfully deleted from the print queue.
Flashing
Receiving data from host computer.
Slow
flashing
flashing
Printer sent a “ stop transmitting” command to the host
computer.
computer.
DARKEN
ON
Printer is in the Configuration Mode. See Section 4,
Configuration and Calibration, for more information.
Configuration and Calibration, for more information.
POSITION
ON
CALIBRATE
ON
O
p
er
at
io
n
M-Series User s Guide
Operation
3-5