Dukane 8934 用户手册

47

• In standby mode, the 

POWER indicator will flash green for approx. 3 

seconds when at least 1 “Power ON” schedule is saved.

• When the schedule function is used, the power cord must be connected to the 

projector and the outlet. The schedule function does not work when the breaker 

in a room is tripped. The power indicator will lights orange or green when the 

projector is receiving AC power.

Schedule Settings (&19)

Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:

1)  Enter “

http://192.168.1.10/” into the address bar of the web browser, and select 

Projector Web Control from the selection window.

2)  Enter your user name and password, and then click the 

[OK]. 

3)  Click the 

[Schedule Settings] on the main menu and select the required 

schedule item. For example, if you want to perform the command every Sunday, 

please select the 

[Sunday].

4) Click the 

[Enable] check box to enable scheduling.

5) Enter the date (month/day) for specific date scheduling.

6) Click the 

[Apply] button to save the settings.

7)  After configure the time, command and parameters, click the 

[Register] to add 

the new event.

8) Click the 

[Delete] button when you want to delete a schedule.

There are three types of scheduling.

1) Daily: Perform the specified operation at a specified time every day. 

2)  Sunday ~ Saturday: Perform the specified operation at the specified time on a 

specified day of the week. 

3) Specific date: Perform the specified operation on the specified date and time.