Cabletron Systems 7F06-02 用户手册

 

1-4

INTRODUCTION

 

Token Ring to be used with the 7F06-02 Module. These modules 
provide the capability to share data without the use of external 
bridges or routers.

The 7C03 MMAC SmartSwitch is a unique module that can be 
installed in an MMAC Series chassis. The 7C04 Workgroup 
SmartSwitch and the 7C04-R Workgroup SmartSwitch are stand-
alone chassis that provide the same functions. 

 

The 7F06-02 Module provides two FDDI ports via front panel 
FPIMs. The 7F06-02 Module includes the following features:

 

The front panel connections are standard Cabletron FPIMs. These 
FPIMs allow the use of single mode or multimode fiber cable with 
MIC or SC type connectors.

 

The 7F06-02 uses LANVIEW, Cabletron Systems built-in visual 
diagnostic and status monitoring system. With LANVIEW LEDs, 
you can quickly identify, at a glance, the status of the device 
connected to a port on the 7F06-02 Module. 

 

The 7F06-02 Module has one backplane connection and two sets of 
A/B front panel FPIM connections. The backplane connection 
provides power to the 7F06-02 Module and a channel for 
communication with the 7X00 SmartSwitch Control Module. The 
two front panel FPIMs provide FDDI connections, allowing the use 
of single mode or multimode fiber cable with MIC or SC type 
connectors.