Cabletron Systems 6H129-08 用户手册
Using the RESET Button
6H128-08 and 6H129-08 User’s Guide
4-7
4.4
USING THE RESET BUTTON
The RESET button located near the upper plastic locking tab of the
module (refer to
module (refer to
) resets the 6H12X-08 processor without
affecting the NVRAM.
Figure 4-3
RESET Button
To reset the 6H12X-08 processor, press and release the RESET button. A
non-conductive tool is recommended for use in pushing the recessed
button. The module processor goes through a reset process lasting
approximately 20 seconds. The module will be unreachable for up to two
minutes as it reenters the network.
non-conductive tool is recommended for use in pushing the recessed
button. The module processor goes through a reset process lasting
approximately 20 seconds. The module will be unreachable for up to two
minutes as it reenters the network.
!
CAUTION
Pressing the RESET button resets the device, and all current
switching being performed by the device is halted. It may take
up to two minutes for the device to reenter the network.
switching being performed by the device is halted. It may take
up to two minutes for the device to reenter the network.
Reset Button
2159-09
6H128-08
FAST ENET