Cabletron Systems 6H129-08 用户手册

This chapter explains how to set up a management terminal to access 
6H12X-08 Local Management, and how to use the Local Management 
screens and commands. This chapter also provides instructions for 
attaching an Uninterruptible Power Supply to the 6H12X-08 using the 
Console Cable Kit provided with the 6C105 chassis.

Local Management for the 6H12X-08 consists of a series of screens, 
some of which allow the management of the module and the 6C105 
chassis, and some that report statistics. The management screens allow 
the user to do the following tasks:

Manage any interface module in the chassis via a connection to a 
single interface module. 

Assign IP addresses and subnet masks to the 6H12X-08. 

Assign a default gateway.

Control access to the 6C105 chassis and the 6H12X-08 module by 
establishing community names.

Download a new image of operating software.

Designate which Network Management Workstations receive SNMP 
traps from the 6H12X-08. 

Configure and have access to any SNMP MIB objects the module 
supports.

Monitor 6C105 chassis environmental information, which includes 
power supply redundancy, power supply status, and fan tray status.

View RMON, switch and interface statistics.

Assign ports to operate in Auto-Negotiate (optional FE-100TX only), 
standard or full duplex mode.

Configure SmartTrunk ports to perform load sharing.