Juniper Networks 200 用户手册

Performing Initial Connection and Configuration

NetScreen-200 Series

23

6.

At the password prompt, type netscreen.

7.

(Optional) By default, the console times out and terminates automatically after 
10 minutes of idle time. To change this timeout interval, execute the following 
command:

set console timeout number

where number is the length of idle time in minutes before session termination. 
To prevent any automatic termination, specify a value of 0.

Changing Your Admin Name and Password

Because all NetScreen products use the admin login name and password (netscreen), it 
is highly advisable to change your admin name and password immediately. Enter the 
following commands:

set admin name name_str

set admin password pswd_str

For information on creating different levels of administrators, see “Administration” in the 
NetScreen Concepts & Examples ScreenOS Reference Guide.

Setting Port and Interface IP Addresses

Through the CLI, you can execute commands that set IP address and subnet mask values 
for most of the physical interfaces.

Viewing Current Interface Settings

To begin the configuration process, it is advisable to view existing port settings by 
executing the following command:

This command displays current port names, IP addresses, Zones, MAC addresses, and 
other useful information.