RuggedCom RS400 用户手册
Serial Protocols
RS400
85
ROS™ v3.5
Default: Unknown
The serial port to which device is attached. If the device with this address is attached to the
serial port of remote host, the value of this parameter is 'Unknown'.
The serial port to which device is attached. If the device with this address is attached to the
serial port of remote host, the value of this parameter is 'Unknown'.
Name
Synopsis: Any 16 characters
Default:
The addressed device name.
Synopsis: Any 16 characters
Default:
The addressed device name.
2.3.11 Dynamic Device Addresses
This table provides ability to view TIN protocol’s device addresses from remote locations that
were learned dynamically.
were learned dynamically.
Figure 55: Dynamic Device Address Table
Figure 56: Dynamic Device Address Form