3com WX1200 用户手册

When on-demand countermeasures are enabled (with the set 
radio-profile countermeasures configured command) only those 
devices configured in the attack list are subject to countermeasures. In 
this case, devices found to be rogues by other means, such as policy 
violations or by determining that the device is providing connectivity to 
the wired network, are not attacked.

Examples — The following command adds MAC address 
aa:bb:cc:44:55:66 to the attack list:

WX4400# set rfdetect attack-list 11:22:33:44:55:66
success:  MAC 11:22:33:44:55:66 is now in attacklist.

„

„

„

Adds an entry to the client black list. The client black list specifies clients 
that are not allowed on the network. MSS drops all packets from the 
clients on the black list. 

Syntax — 

set rfdetect black-list mac-addr

„

— MAC address you want to place on the black list.

Defaults — The client black list is empty by default.

Access — Enabled.

History —Introduced in MSS Version 4.0.

Usage — In addition to manually configured entries, the list can contain 
entries added by MSS. MSS can place a client in the black list due to an 
association, reassociation or disassociation flood from the client.

The client black list applies only to the WX switch on which the list is 
configured. WX switches do not share client black lists.